Mazak CD1472-D1M LCD Replacement Guide
June 2026 | Kongto Technology | Compatibility Matrix
Overview
The Mazak CD1472-D1M is a 10.4-inch color CRT display found in Mazak T-32 and M-32 series CNC controls. This model is particularly prone to color shift and burn-in from displaying the same coordinate information for decades. The LCD replacement provides consistent color accuracy and much higher brightness.
Compatible Systems
- Mazak T-32 (lathe control)
- Mazak M-32 (machining center control)
- Mazak T-PLUS / M-PLUS (with same connector)
Important: Mazak Connector Difference
Mazak CRTs use a 26-pin connector, which is different from FANUC's Honda MR-20M (20-pin). These connectors are physically incompatible β you cannot use a FANUC LCD on a Mazak machine. Always verify the connector type before ordering. The 26-pin connector carries both power (DC 24V) and video signals.
Installation
- Power off CNC completely
- Remove CRT bezel screws
- Disconnect 26-pin connector
- Connect 26-pin cable to new LCD
- Mount using original screw holes
- Power on and verify display
Also Compatible
The same LCD replacement works with: DR5614, C-5470NS, AIQA8DSP40, and MDT-1283B (Mazak T-2/T-3/M-2 controls).
Need a replacement?
Email szkongto01@foxmail.com with your CNC model and a photo of your current display. Free compatibility check and same-day quote.